Exhaust Stage6 R/T 80 - 90cc CNC Orange Minarelli AM6
Description
Low mount exhaust 80 - 90 AM6
Exhaust Stage6 R/T 80 - 90cc CNC orange Minarelli AM6, high-end exhaust from 2-stroke tuning expert Stage6 R/T, developed and built for tuned Minarelli AM6 models, with a displacement of 80cc - 90cc.
Design Stage6 80-90 AM6 exhaust
It is a classic racing exhaust made of carefully hand-welded sheet steel cones with a high-quality silencer; this is the orange version, there are other colours available. As is usual with high-end systems, the exhaust has a so-called racing finish, which means the body is unpainted and untreated. We therefore recommend applying a lubricating spray regularly to prevent premature rusting.
Performance high-mount exhaust for Minarelli AM6
Stage6 subjected the Stage6 R/T 80 - 90cc to many tests on our test bench and they are more than happy with the results. The exhaust assures maximum power throughout the entire rpm range and is specially designed for powerful cylinders with 80cc to 90cc displacement. This is basically as far as you can go when it comes to 2-stroke tuning, so if you want to crank up the power output of your scooter to 11 - this is the exhaust that will make it possible.
The exhaust is the perfect complement for 77cc to 90cc racing and high-end cylinders such as the Stage6 Big Racing 77cc or 88cc or the Stage6 Streetrace 88cc and the Top Performances 80cc/86cc.
Technical details Stage6 80 - 90 cc exhaust AM6
- Exhaust 80 - 90cc
- Low mount
- Orange silencer: inner d. 23mm - outer d. 60mm - length 229mm
- Venturi bush / flange: inner d. 32mm - outer d. 35mm - height 42mm
- For Minarelli AM6
- High-end racing system - NOT street-legal (depending on country)!
Exhaust scooter, moped, motorcycle
The exhaust has a major influence on the performance of scooters and mopeds. By replacing the original with a tuning exhaust, you can improve the gas flow and increase the engine power.
exhaust parts
- The headpipe or header is the connection between cylinder and exhaust, and an exhaust gasket provides the necessary seal. In street-legal systems, the headpipe is equipped with a legally required restriction. Some people remove this restrictor to increase power.
- The actual exhaust body or expansion chamber is connected to the header pipe. In a classic 2-stroke expansion chamber type exhaust, gas pressure waves are used to improve engine performance.
- At the end there us the silencer or muffler that discharges the exhaust gases and, with the help of damping wool, also reduces the noise generated by the vehicle.
Replacing the exhaust
As a general rule, please check if the exhausts fits BEFORE REMOVING THE RESTRICTOR, otherwise the exhaust cannot be returned.
For 2-stroke engines, various settings and components usually need to be adjusted when the original exhaust is replaced with a tuning version. These changes include:
- Adjusting the carburetor by replacing the main jet.
- Upgrading the clutch or replacing the clutch springs.
- For scooters, it may be necessary to reduce the weight of the variator weights.
Tuning Level: High End racing
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
High End Racing products are exclusively designed for racing and should only be handled by tuning pros with the appropriate technical know-how. High-end racing parts often require modifications or machining of certain elements to accommodate the often larger components (larger crank webs, larger intake, etc.). Whether you stick with 50cc or increase the displacement, high-end racing parts offer much higher performance than the original parts and are the most powerful tuning parts.
Note: To ensure the reliability of the engine, it is important that the parts are compatible and that you do regular maintenance on your two-wheeler.
| Exhaust Stage6 R/T 80 - 90cc CNC Orange Minarelli AM6 | |
|---|---|
| Article no. | S6-96188851/OR |
| EAN | 4051272014864 |
| Weight | 1,32 kg |
| Series | R/T |
| Brand | Stage6 R/T |
| Product type | Exhaust |
| Tuning level | High-end |
| Homologation | No |
| Exhaust finish | Non-coated |
| Exhaust mount | Low |
| Colour | Orange |
| Flange diameter | 32mm, 35mm |
