Description
Malossi driveshaft Piaggio Si
Malossi primary gear shaft. You can use it to drive a Minarelli clutch / clutch bell (eg Yamaha Aerox, Malaguti F12) on Piaggio Ciao or Piaggio Si mopeds.
This gear shaft is part of the Malossi MHR overrange kit for Piaggio Si.
Please note: The gear shaft must be mounted in combination with a Malossi gearbox: 677021; 6719286; 6718630. If you want to mount a clutch different than the Malossi clutch specially designed for Piaggio Si, you should know that you have to remove the clutch completely and change the direction of the clutch shoes!
Technical data of the gear shaft MoFa Piaggio Si :
- Shaft diameter: 13,5 mm
- Incl. nut M10x1mm
- Incl. oil seal 13,5x22x4mm
- Incl. needle bearing
Malossi Overrange
The Overrange CVT series comprises a limited number of products. It is a complete Overrange CVT with all associated components.
Overrange CVTs are larger than standard CVTs and thus have a larger adjustment range. Overrange CVTs are primarily suitable for heavily tuned engines. The Malossi Overrange variator will get the full power out of your engine.
The kits usually include:
- A complete CVT front pulley
- A complete torque drive / rear pulley
- Different CVT weights
- A contra spring
- Grease / lubricant
Scooter gearbox
The transmission of scooters and some mopeds is located in a case behind the clutch and torque driver and has the function of reducing rpm and ultimately driving the wheel axle.
The transmission of a scooter has a direct influence on top speed. If the engine develops enough power and torque at low rpm, you can choose a longer gear ratio to achieve a higher top speed without any noticeable loss in acceleration.
Please note: if you don't have a press, better choose pre-assembled gears!
Primary Gear Shaft for Malossi MHR Over Range Piaggio Si | |
---|---|
Article no. | M6718823 |
Weight | 0,22 kg |
Series | Overrange |
Brand | Malossi |
Product type | Transmission |
Type | Primary |