Spare Parts

Gasket Sheet reinforced paper h=0.3mm 300x450mm

Gasket Sheet reinforced paper h=0.5mm 300x450mm

Nut M4 Piaggio / Vespa

Screw M8x40mm gearbox / transmission cover Piaggio / Vespa

Tapping Screw M6x50 Piaggio / Vespa

Screw M6x10mm Piaggio / Vespa

Nut M5 Piaggio / Vespa

Screw M6x25mm for Piaggio / Vespa / Derbi

Oil Seal NBR 27x42x7mm

Screw Nipple cable / clutch cable - 8.0x14.0mm for Vespa 50

Screw M10x16 rim / brake drum 9“ flat head Vespa 50 L / N / R / S / 90

Rivet f. steering lock cover 36298 Piaggio

Cable Adjuster Screw M8x1.00 - L.15mm - sleeve d.6,6mm

Cable Adjuster Screw M5x1.00 - L.25mm - sleeve d.9,8mm

Carburetor Case Gasket w/ auto-lube Vespa PX80-200 E Lusso

Fuel Cap Gasket Vespa GL / GS / PX / Rally / Sprint / Piaggio Ape

Washers / Gaskets coper Naraku 12x16x1.5mm 100 pcs.

Gaskets fibre Naraku 8x12x1mm 100 pcs.

Gaskets fibre (400 pcs.)

Washer / Gasket copper Naraku 6x10x1.5mm

Washer / Gasket copper Naraku 12x16x1.5mm

Gasket fibre Naraku 8x15x1mm

Gasket fibre Naraku 8x12x1mm

Gasket fibre Naraku 6x10x1mm

Gasket fibre Naraku 5x9x1mm

Gasket fibre Naraku 5.5x7.5x1mm

Gasket fibre Naraku 16.2x22x1mm

Washer / Gasket aluminium Naraku 6x12x1mm

Washer / Gasket aluminium Naraku 16x22x1.5mm

Washer / Gasket aluminium Naraku 14x20x1.5mm

Washer / Gasket aluminium Naraku 12x18x1.5mm

Mounting Bolt brake / clutch lever Vespa PX / Rally / Sprint

Steering Lock Cover Vespa 50-125 / Piaggio Ape TM P 50

Cable Adjuster Screw M8x1.25 - L.18mm - sleeve D.7,8mm

Cable Adjuster Screw M6x1.00 - L.14mm - sleeve D.5mm

Fixing Screw oil hose M8x1

Throttle Cable 180cm - universal

Bearing sealed 12x37x12mm - 6301.2RS.C3

Screw M7 x 40

Screw M5x16mm

Cable Adjuster Screw Domino M7x1.00 - L.18mm - sleeve D.8mm

Needle Bearing HK1612 Piaggio 50/125 primary shaft 16x22x12mm

Fuel pump Dellorto, output 55 litre/h

Cable Adjuster Screw M7x1.00 - L.16mm - sleeve D.6,3mm

Throttle Cable Sleeve HQ 1.9mm by the meter polymer core red

Throttle Cable Sleeve HQ 1.9mm (by the meter) blue

Throttle Cable Sleeve HQ 1.9mm with polymer core black (by the meter)

Throttle Cable Housing 5mm high quality (by the meter) red

Throttle Cable Housing 5mm high quality (by the meter) blue

Throttle Cable Housing 5mm high quality (by the meter) black

End Cap for Bowden cable housing 5mm

Nut RMS, for rear wheel Piaggio (Ref.121850350) M16x1.25

Nut for flywheel RMS Vespa 50 / 90 / 125 / Primavera / ET3

Clutch Castle Nut RMS Vespa PX 125 / 150 / 200 / Cosa / T5

Nut for rear wheel RMS, Vespa smallframe ET3 50/90/125

Seal for oil filler screw, RMS, Vespa (all models)

Gasket for brake base plate, RMS, Vespa smallframe (all models)

Bearing for primary shaft RMS, SKF, Vespa largeframe, 12x37x12

O-Ring for dust cap rear Vespa PX/T5/GT/GTR/Sprint/Rally
