Description
Apart from its excellent workmanship, it has considerable power for a 70cc sports kit.Though originally built for heavy use, the kit has more torque and more power than the original cylinder, especially at mid and high rpm range.
With the right configuration (17.5/21mm carburetor and sports exhaust), you'll get 10/11hp out of it, and top speed will also be slightly higher as the maximum rpm will be higher than with the original cylinder.
The kit includes:
- 70cc Aluminium Cylinder, 47.6mm, with 6 transfer ports and exhaust port with "boost" ports
- One-Ring Piston
- High Compression Cylinder Head
- Gasket Set for mounting
Not street-legal!
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Sport
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.
Aluminium cylinders
Aluminium cylinders are more powerful than cast iron cylinders, but require more regular maintenance and must be combined with different components such as a reinforced crankshaft and a larger carburetor.
How to run in an aluminium cylinder?
Aluminium cylinders should be run in for about 200 kilometers , and you should use a fully synthetic engine oil.
Note: To ensure optimum performance and reliability, it is advisable to measure the squish clearance. Just have a look at our tutorial How to adjust squish clearance.