Big Valve Kit MXS Racing + reed valve Stage6 VForce 3 Minarelli vertical
Description
MXS Big Valve Kit - Neochrome
For fans of big valve kits, we have put together a high-performance MXS Racing Big Valve Kit plus Stage6 VForce3 reed valve for Minarelli vertical, as always at a great price, here in the Limited Edition with trendy neochrome reed valve cage.
The High Flow Big Valve intake kit (intake manifold + reed cage) comes with a Stage6 VForce 3 reed valve AM6 / Derbi, which supplies the engine very effectively with mixture and thus increases the performance of the engine.
The Big Valve Kit is intended for racing and high-end cylinders, mainly for the MXS Racing, MXS Sport or Stage6 MKII 70cc cylinders.
Scope of delivery MXS intake kit Big Valve
- Intake rubber d=32mm / connection 35mm (for PWK carburetor)
- Aluminum reed cage Neochrome
- Stage6 reed valve VForce3 by Moto Tassinari
- Allen screws (8x)
- Aluminum spacer 1.5mm for sealing the reed valve
- 1x gasket (paper)
- Clamp
- Assembly instructions
Attention, only one gasket is supplied. Depending on the intake manifold, you will probably have to add sealing compound or a paper gasket.
Suitable for carburetors with 35mm / 36mm connection
- Keihin PWK 19-30mm (35mm connection)
- Dellorto VHST 24-28mm (36mm connection)
- Dellorto VHSH 30mm (36mm connection)
- Dellorto PHBH 26-30mm (35mm connection)
Note: The connection width is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Intake Kit for scooter, motorcycle and moped
The intake on a 2-stroke engine is composed of a series of parts that connect the carburetor or injection unit to the engine. The aim here is to assemble the components in such a way that it leads to a better cylinder filling.
The intake system of a 2-stroke scooter or motorcycle consists of:
- Intake manifold
- Reed valve
- Sometimes with spacer / socket
What is the benefit of a tuning intake kit?
Generally, installing an optimized intake results in a straighter intake to the engine and increased intake volume to improve mixture flow and engine filling. The reed petals are usually made of fiber or carbon, which improve engine response and peak power.
Note: Installing an intake kit is often necessary when installing a larger carburetor as well as when using a sport air filter. Always remember to check carburetor settings and make sure the system is fully sealed.
| Big Valve Kit MXS Racing + reed valve Stage6 VForce 3 Minarelli vertical | |
|---|---|
| Article no. | MXS-015 |
| Weight | 0,56 kg |
| Brand | MXS Racing |
| Product type | Intake kit |
| Manifold connection | 35mm, 36mm |
