Description
Rear brake cable Piaggio Sfera / Quartz / Skipper / SKR
This brake cable is a replacement for the original cable. It features an internal PTFE coating that provides smoother operation and improved durability. No additional lubrication is required.
Suitable for Piaggio Skipper 125/150, SKR 125/150, Quartz, and Sfera 50/80 models up to 1994.
Note: PTFE-coated cables should not be lubricated after installation, as the coating may swell and become damaged.
Details PTFE brake cable Piaggio Skipper
- High-quality brake cable with PTFE liner
- Suitable for Piaggio Skipper / SKR / Quartz / Sfera
- Piaggio OEM number: 266213
- Length: 200cm
brake cable
Classic cable brakes can still be found on many scooters and mopeds. This is also the case for some older motorcycles and vintage Vespas.
How to Change the brake cable
If the brake cable is seized, frayed or even broken, you will need to replace it. Replacing a brake cable is very easy.
- First, loosen the cable as much as possible if it is not torn in pieces. The tensioner is located either on the drum or on the lever (sometimes on both).
- Loosen the cable nipples in the brake lever and on the brake drum.
- Pull out the cable with the sleeve, paying attention to where the cable runs.
- Route the new cable with sleeve just like the old cable.
- Put the nipples back in place.
- Tension the cable to get a good braking performance.
If the cable is broken or frayed at one end, you can also repair it using a cable clamp.
Remember to lubricate all Bowden cables on the vehicle regularly with appropriate tools and products.
| Brake Cable rear PTFE Piaggio Sfera / Quartz / Skipper / SKR | |
|---|---|
| Article no. | TFL19715 |
| EAN | 8715705025129 |
| Weight | 0,32 kg |
| Brand | TFL |
| Product type | Brake cable |