Cylinder Naraku 70cc 25/28mm Minarelli AM
Description
Torquey 70cc cylinder with 12mm piston pin for everyday use from NARAKU for Minarelli AM6. This kit is not intended for very high-revving engines, the focus is on the lower rpm range. It provides very good and steady acceleration very early, slightly above idle, without straining the engine with unnecessary high revs. There's sufficient power available right from the get go to allow for excellent take-offs and climbing hills, even with a passenger, is a breeze. The noise level is pretty close to normal. Even with the original exhaust you will notice a considerable increase in power which makes this cylinder an all-rounder for everyday riding.
Can be used with original and sport exhaust. Carburetor jetting has to be slightly adjusted (about 7% to 10% bigger jets). We recommend using a larger carb (19mm).
- 70cc cast iron cylinder
- 2-ring piston 47mm
- incl. gaskets
- with exhaust reducer bush 25 / 28mm
The cylinder head is not included, please use original head.
How to Install a cylinder on a scooter, motorcycle or moped
The cylinder or cylinder kit is the heart of the engine on scooters, motorcycles and mopeds. It consists of a cylinder, a piston with piston ring(s), a cylinder head and gaskets needed for installation.
The service life of a cylinder depends on whether it has been fitted correctly.
Tuning Level: Sport
We categorize our products into different performance levels Original, Sport, Racing and High End , so that our customers can choose the right parts for their setup. It is really important to combine parts that belong to the same tuning level, this is especially true for cylinders, crankshafts and exhausts.
The products listed under Sport yield better performance than Original parts. They may have technical differences, such as the use of higher quality materials, a larger displacement or a performance-enhancing design. They are suitable for everyday use and have a long service life.