Exhaust (without silencer) Stage6 R/T 90 - 100cc Minarelli AM6
Description
Stage6 R/T exhaust 90 - 100cc AM6
Exhaust Stage6 R/T 90 - 100cc Minarelli AM6, high-end exhaust from the specialist for 2-stroke tuning Stage6 R/T, designed for tuned Minarelli AM6 enignes with 90cc - 100cc displacement.
Stage6 R/T exhaust design 90cc - 100cc
This is a classic racing exhaust made from carefully hand-welded sheet steel. As is usual with high-end systems, the exhaust comes with a so-called racing finish, i.e. unpainted and untreated. This is the actual exhaust body WITHOUT silencer!
Performance Stage6 R/T racing exhaust 90 - 100
Stage6 has subjected the Stage6 R/T 90 - 100cc to numerous tests on the test bench and is more than satisfied with the results. The exhaust guarantees maximum power across the entire RPM range and is specially designed for powerful 90cc to 100cc cylinders. There is basically the end of the totem pole when it comes to 2-stroke tuning, so if you want to maximize the power output of your two-wheeler - this is it.
Technical specifications Stage6 R/T high-end exhaust for AM6
- Exhaust 90 - 100cc
- Low mount
- Racing finish / unpainted
- Without silencer
- Silencer mount: 2 screws
- Screw spacing: 43 mm
- Venturi flange / fitting sleeve: D. inside 32 / 34mm . D. outside 38mm - height 42mm
- For Minarelli AM6
- High-end tuning system - WITHOUT homologation!
Exhaust scooter, moped, motorcycle
The exhaust has a major influence on the performance of scooters and mopeds. By replacing the original with a tuning exhaust, you can improve the gas flow and increase the engine power.
exhaust parts
- The headpipe or header is the connection between cylinder and exhaust, and an exhaust gasket provides the necessary seal. In street-legal systems, the headpipe is equipped with a legally required restriction. Some people remove this restrictor to increase power.
- The actual exhaust body or expansion chamber is connected to the header pipe. In a classic 2-stroke expansion chamber type exhaust, gas pressure waves are used to improve engine performance.
- At the end there us the silencer or muffler that discharges the exhaust gases and, with the help of damping wool, also reduces the noise generated by the vehicle.
Replacing the exhaust
For 2-stroke engines, various settings and components usually need to be adjusted when the original exhaust is replaced with a tuning version. These changes include:
- Adjusting the carburetor by replacing the main jet.
- Upgrading the clutch or replacing the clutch springs.
- For scooters, it may be necessary to reduce the weight of the variator weights.
| Exhaust (without silencer) Stage6 R/T 90 - 100cc Minarelli AM6 | |
|---|---|
| Article no. | S6-96188951 |
| EAN | 4051272010859 |
| Weight | 2,16 kg |
| Series | R/T |
| Brand | Stage6 R/T |
| Product type | Exhaust |
| Homologation | No |
