Description
Intake manifold Motoforce Racing PWK / VHST / PHBG
Intake manifold Motoforce Racing 35mm / 24mm for Minarelli AM6, with vacuum / oil port. The intake rubber (35mm connection) is suitable for PWK and VHST carburetors. Also included is an aluminum adapter (24mm connection), which can also be used to mount carburetors with a metal connection (PHBG). A clamp for optimum mounting is also included.
Attention: If the oil port is not used, it must be sealed as otherwise the engine will draw air.
Suitable for carburetors with 35mm / 36mm connection
- Keihin PWK 19-30mm (35mm connection)
- Dellorto VHST 24-28mm (36mm connection)
- Dellorto VHSH 30mm (36mm connection)
- Dellorto PHBH 26-30mm (35mm connection)
The diameter measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Suitable for carburetors with 24mm connection width
- Dellorto 15-21mm type PHBG (metal flange)
- Polini CP 15-21mm (metal flange)
- Arreche 16-21mm (metal flange)
Intake manifold for scooters, motorcycles, and mopeds
The intake manifold is an essential part of the intake system, it directs the air-fuel mixture to the cylinder. Here are the main types of intake manifolds:
Intake manifold with rubber flange
Intake manifolds with flexible intake rubber are the most common type. Flexible materials such as rubber or silicone absors the vibrations of the engine. This flexibility reduces the risk of cracks or leaks. In addition, the flexible mounting makes it easy to adapt the intake manifold to different engine setups.
Intake manifold with metal flange
These rigid-mount intake manifolds are more commonly used on vintage scooters, classic motorcycles or old mopeds. The intake flange is usually made of metal, which provides greater strength and resistance to deformation. Rigidmetal flange assembly also ensures more precise alignment between intake manifold and carburetor.
Swivel intake manifold
Rotatable intake manifolds are commonly used on 50cc motorcycles. They offer greater flexibility in installation, allowing to align the carburetor to meet individual needs.
Note: The diameter of the intake manifold must fit the intake manifold connection width of the carburetor!
| Intake Manifold 35/24mm PWK / VHST / PHBG Minarelli AM6 | |
|---|---|
| Article no. | MF15.19021 |
| EAN | 4051272017759 |
| Weight | 0,15 kg |
| Brand | MotoForce |
| Product type | Intake manifold |
| Material | Aluminium, Rubber |
| Manifold connection | 24mm, 35mm, 36mm |
