Description
Intake manifold Barikit PWK / VHST / PHBG
Intake manifold Barikit 35mm / 24mm with vacuum / oil port for Minarelli AM6. The intake rubber (35mm connection) is suitable for carburetors (PWK and VHST). In addition, an aluminum adapter (AW 24mm) is included which can be used to mount carburetors with a clamp connection (PHBG). The intake manifold comes with gasket and clamps.
Attention: The intake rubber has an additional vacuum or oil port. If this is not used, it must be sealed as otherwise the engine will have air leaks.
Suitable for carburetors with 35mm / 36mm connection
- Keihin PWK 19-30mm (35mm connection)
- Dellorto VHST 24-28mm (36mm connection)
- Dellorto VHSH 30mm (36mm connection)
- Dellorto PHBH 26-30mm (35mm connection)
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Suitable for carburetors with 24mm connection
- Dellorto 15-21mm type PHBG (clamp connection)
- Polini CP 15-21mm (clamp connection)
- Arreche 16-21mm (clamp connection)
Intake manifold for scooters, motorcycles, and mopeds
The intake manifold is an essential part of the intake system, it directs the air-fuel mixture to the cylinder. Here are the main types of intake manifolds:
Intake manifold with rubber flange
Intake manifolds with flexible intake rubber are the most common type. Flexible materials such as rubber or silicone absors the vibrations of the engine. This flexibility reduces the risk of cracks or leaks. In addition, the flexible mounting makes it easy to adapt the intake manifold to different engine setups.
Intake manifold with metal flange
These rigid-mount intake manifolds are more commonly used on vintage scooters, classic motorcycles or old mopeds. The intake flange is usually made of metal, which provides greater strength and resistance to deformation. Rigidmetal flange assembly also ensures more precise alignment between intake manifold and carburetor.
Swivel intake manifold
Rotatable intake manifolds are commonly used on 50cc motorcycles. They offer greater flexibility in installation, allowing to align the carburetor to meet individual needs.
Note: The diameter of the intake manifold must fit the intake manifold connection width of the carburetor!
| Intake Manifold Barikit V1 35/24mm PWK / VHST / PHBG AM6 | |
|---|---|
| Article no. | BAR-TUB-01 |
| EAN | 8435031119162 |
| Weight | 0,20 kg |
| Brand | Barikit |
| Product type | Intake manifold |
| Material | Rubber |
| Manifold connection | 35mm, 36mm |