Description
Steering head bearings Yamaha / MBK
When replacing the fork or in case of heavy wear, the headset bearings should be replaced. This set contains a complete set of bearings for the upper and lower steerer tube.
Tip: Grease the bearings a little before fitting.
technical data headset rms:
- Inner diameter: 29mm
- Outer diameter: 39mm
- Bearing cup diameter: 27 mm for 27 mm steering columns.
- Suitable for Yamaha Aerox, BWS NG, Spy / MBK Nitro, Booster NG, Rocket
Attention: Only for forks with unstepped steering column.
Steering head bearings for scooters, motorcycles and mopeds
Steering head bearings, also known as headset, have the task of facilitating the rotation of the fork. The bearings are usually located inside the steering column and provide the connection between the frame and fork.
How steering head bearings work
Steering head bearings usually consist of balls or rollers located between the inner and outer rings. They are designed to absorb and compensate for vertical and horizontal loads as well as torsional forces generated during driving.
Too much play in the steering column
- The first thing you should do is stop immediately, safety first!
- Then you can check whether the steering column nut is tight and tighten it if necessary.
- If the steering column nut is tight, it is possible that the steering head bearings are damaged and you need to replace them with new ones.
- When installing steering head bearings, it is important to apply grease to the bearings.
Steering bearings, Yamaha Bws Spy Aerox Neo | |
---|---|
Article no. | R184220160 |
EAN | 4051272105319 |
Weight | 0,22 kg |
Brand | RMS |
Product type | Steering head bearing |