Description
Malossi Ignition Coil & CDI Digitronic
Malossi has launched a complete range of state of the art CDI / ECU units for newer Euro 4 / and Derbi Euro 5 engines. It is a very high quality racing CDI for high performance cylinders and setups.
Optimized ignition curve
Optimized ignition curves (with variable ignition timing, over 16 breaker points for RPM, 8 for temperature) improve the output of your engine by quite a bit. Installation is really easy - small, compact and with 100% matching connectors - plug & play, done.
The original integrated rev limiter is increased, so you can fully exploit the torque and power of the engine. The Digitronic is designed up to 15,000 rpm, making it suitable for racing.
SAS valve performance map
The performance of the SAS valves is improved as the Digitronic compensates for the power of the carburetor, which is normally non-linear; engine power is increased, emissions are reduced.The SAS valve reduces emissions and optimizes engine performance for all operating conditions.
Technical details Malossi ECU Digitronic:
- Plug & Play installation
- RPM speed limiter 15,000 rpm
- For Euro 4 and Euro 5 engines.
CDI and coil
The CDI (for Capacitor Discharger Ignition) and the ignition coil are an essential part of the ignition. While the coil is actually just an energy storage device that supplies the ignition spark to the spark plug, the CDI module is a more complex component that controls the engine speed at which the spark should occur. It can therefore have an effect on engine behavior and performance.
Open CDI
Many riders equip their 50cc geared mopeds and scooters with open, i.e. derestricted CDIs. In most cases, the original CDI throttles the maximum achievable engine speed, which significantly reduces performance and top speed.
To remove this rev limiter and thus increase maximum speed, you can install a CDI without a rev limiter instead of the original CDI.
Beware! When using an open CDI, the carburetor must be readjusted, so it is best to order new jets as well.
Programmable CDI
Programmable CDI control units are available for tuned racing engines on 50cc scooters and moorcycles as well as for motocross bikes. These CDIs are designed for more experienced tuners who want to optimize the settings of their two-wheeler as much as possible.
With a programmable CDI, the ignition timing is dynamic so that the spark always jumps at the optimum time at both high and low engine speeds. This leads to a better increase in speed, higher torque and an overall increase in maximum power.
4-stroke engines with fuel injection are equipped with an ECU (Electronic Control Unit), which also controls the fuel injection. When tuning a four-stroke engine with an electronic injection system, a programmable CDI is therefore an absolute must in order to avoid breakdowns and engine damage.
Symptoms of a defective coil or CDI
If these two elements fail, the symptoms are usually very easy to recognize: no spark at the spark plug, so the engine will not start.
It is best to proceed in sequence: First change the spark plug, then the spark plug cap, then the coil and only then consider the CDI or the ignition itself as the source.
| CDI Unit Malossi Digitronic Derbi Euro 4 / 5 | |
|---|---|
| Article no. | M5518548B |
| Weight | 0,20 kg |
| Series | Digitronic |
| Brand | Malossi |
| Product type | Ignition coil & CDI |