Description
Malossi HTQ primary Gear 14/39 piaggio before 1998
Malossi HTQ primary gear set, 14/39 ratio, for Piaggio engines before 08/1998, compatible with all models using 12" and 13" wheels (e.g. NRG / Runner) and 10" models with high tire cross-section (Typhoon).
A longer gear ratio shifts engine power to where it’s needed most, assuming the engine delivers the extra output. On heavily tuned engines, extended gearing offers a clear advantage. However, such gearing is not suitable for stock setups.
Installation Note:
The large gear must be pressed onto the original intermediate shaft. This requires special tools and/or a hydraulic press.
We can offer you gearboxes from Stage6 that do not need to be pressed!
Scooter gearbox
The transmission of scooters and some mopeds is located in a case behind the clutch and torque driver and has the function of reducing rpm and ultimately driving the wheel axle.
The transmission of a scooter has a direct influence on top speed. If the engine develops enough power and torque at low rpm, you can choose a longer gear ratio to achieve a higher top speed without any noticeable loss in acceleration.
Please note: if you don't have a press, better choose pre-assembled gears!
| Primary Gears Malossi 14/39 Piaggio NRG after 1998 | |
|---|---|
| Article no. | M679080 |
| Weight | 0,44 kg |
| Series | HTQ |
| Brand | Malossi |
| Product type | Transmission |
| Type | Primary |
| Assembly | Press-fitting |
| Gear ratio | 14/39 (2,79) |
