Description
Intake manifold Stage6 Viton® short straight Piaggio
Short Stage6 Intake Manifold for Piaggio - excellent value alternative to other, more expensive manifolds. A short intake leads to improved engine response and the torque curve is moved up the rev range.
So-called biofuels are becoming more and more popular. They may contain up to 20% of pure alcohol, which makes the fuel more aggressive towards standard NBR rubber compounds. Over time, the alcohol will soften the NBR. For products that are subject to extensive fuel contact (reed valves, intake manifolds etc.), Stage6 opted for a FKM (Viton) compound, which is slightly more expensive, but also more alcohol- and heat-resistant.
Note: The original air filter box cannot be used with this intake manifold.
Suitable for carburetors with 24mm and 25mm connection
- Dellorto 12-21mm type PHVA / PHBN / PHBG
- Polini CP 17.5-21mm (25mm connection)
- Gurtner and Weber 12-16mm
- TK and China 2-stroke 12-16mm
- Arreche 16-21mm
Note: The connection is measured on the carburetor. Rubber mounts are often slightly smaller, as the rubber expands during installation.
Intake manifold for scooters, motorcycles, and mopeds
The intake manifold is an essential part of the intake system, it directs the air-fuel mixture to the cylinder. Here are the main types of intake manifolds:
Intake manifold with rubber flange
Intake manifolds with flexible intake rubber are the most common type. Flexible materials such as rubber or silicone absors the vibrations of the engine. This flexibility reduces the risk of cracks or leaks. In addition, the flexible mounting makes it easy to adapt the intake manifold to different engine setups.
Intake manifold with metal flange
These rigid-mount intake manifolds are more commonly used on vintage scooters, classic motorcycles or old mopeds. The intake flange is usually made of metal, which provides greater strength and resistance to deformation. Rigidmetal flange assembly also ensures more precise alignment between intake manifold and carburetor.
Swivel intake manifold
Rotatable intake manifolds are commonly used on 50cc motorcycles. They offer greater flexibility in installation, allowing to align the carburetor to meet individual needs.
Note: The diameter of the intake manifold must fit the intake manifold connection width of the carburetor!
| Intake Manifold Stage6 Viton® straight short 24mm Piaggio | |
|---|---|
| Article no. | S6-3314002/VT |
| EAN | 4051272218088 |
| Weight | 0,08 kg |
| Brand | Stage6 |
| Product type | Intake manifold |
| Material | Viton |
| Manifold connection | 24mm, 25,5mm, 25mm |
- MotoForce
Carburetor Motoforce PHVA 17,5 lever choke AM6 / Derbi35,00 €In stockRRP42,50 €-18% DiscountSale - Stage6
Intake Kit Stage6 MK2 24/35mm PHBG / PWK Piaggio109,00 €In stock - Stage6
Reed Valve Stage6 Viton Piaggio75,50 €In stock - MotoForce
Reed Valve Gasket Piaggio / Peugeot horizontal1,70 €In stockRRP1,90 €-11% Discount