Brake Shoes grooved w/ springs 110x25mm
incl. tax, plus shipping
Description
Brake Shoes, grooved, with springs 110x25mm. Grooves on brake liners allow the gases generated by the heat that is produced between pad and brake to pass freely. The air currents passing through the grooves improves heat dissipation to the cooling effect. The grooves also channel away dust, water and other debris from the braking area to improve braking performance which is especially important when riding on wet roads.
The lining material is a little softer than normal, it has better grip and leads to improved brake repsonse.
A set of brake springs is included.
Measurements: 110mm x 25mm
Brake shoes / drum brakes are usually at the rear, Though there are exceptions to this rule. In the following list F = front, R= rear:
Aprilia Amico 50 before 1993 F/R
Honda Lead 50 F
Kymco Agility Basic 50 F/R
Kymco DJ 50 F
Kymco DJ 50 Refined F
Kymco Filly 50 F/R
Kymco MXU 50 F
Kymco MXU 150 F
MBK Booster before 1994 F/R
Peugeot Ludix 50 drum/drum F/R
Peugeot Zenith 50 F/R
Yamaha BW`s 50 before 1994 F/R
Brake shoes for scooter, moped and classic motorcycle
The brake shoes of mopeds, scooters and vintage motorcycles are attached to the chassis or engine. By operating the brake lever or brake pedal, the brake shoes are pressed against the brake drum, creating enough friction to slow the vehicle down and ultimately bring it to a stop.
Brake shoe types
Brake shoe linings are made of composite materials such as ceramic, sintered metal or organic materials (carbon fiber, Kevlar). Each material offers advantages and disadvantages in terms of performance, durability and brake performance.
Brake pad wear
The linings of brake shoes wear out naturally over time. Their service life depends on factors such as riding style, road conditions and type of brake pads used. It is very important to regularly check the brake shoes for wear and replace them when necessary.
Replacing brake shoes
To replace the brake shoes, you will usually have to remove the wheel to access the drum brake with the brake shoes. The actual replacement is quite simple. Always remember to clean the brake drum thoroughly with brake cleaner before remounting the wheel.
Brake Shoes grooved w/ springs 110x25mm | |
---|---|
Article no. | IP13452 |
EAN | 4250362414328 |
Weight | 0,20 kg |
Brand | Standard Parts |
Product type | Brake pads |
Rainuré matériaux classic mais a ce prix, sa fait le taf.